1) Description:
– Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
– Vehicle Testing
– First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition
– Ignition: primary and secondary
– Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
– Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
– Performer: Petrol/Diesel
– Starter and charging circuits
2) Oscilloscope
– 8 channels oscilloscope, 2.4MSa/s real time sampling rate
– 12 bits vertical resolution, spectrum analysis function
Programmable Generator
– 8 channels programmable generator
– Can analog signals of crankshaft, camshaft etc.
3) Others
– USB 2.0 interface plug and play, and no need extra power supply;
– More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
– Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7;
4) Software Support
– Operating System: Windows NT, Windows 2000, Windows XP, VISTA, Windows 7
5) Specification:
– Model Hantek1008C
– Oscilloscope Mode
– Vertical Analog Channel 8
– Input Impedance Resistance: 1M??
– Input Sensitivity 10mV/div to 5V/div
– Input Coupling DC
– Resolution 12 bits
– Horizontal Memory Depth 4K
– Max. Input 400V (DC+AC Peak)
– Real-Time Sampling Rate 2.4MSa/s
– Time Base Range 1ns/div to 20000s/div(1-2-5 sequences)
– Time Base Precision ??50ppm
– Trigger Source CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8
– X-Y Mode X-Axis Input CH1
– Y-Axis Input CH2
– Cursors and Measurement Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
– Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width,
– Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes
– Waveform Signal Process: +,- , x,??, FFT, Invert
– Voltage Range: 10mV to 5V/div @ x 1 probe
– 100mV to 50V/div @ x 10 probe
– 10V to 5000V/div @ x 1000 probe
– 100V to 50000V/div @ x 10000 probe
– 200mV to 100V/div @ 20:1
– Current Range: 100mA to 50.0A/div @ CC65(20A)
– 1000mA to 500.0A/div @ CC65(65A)
– 1A to 100.0A/div @ CC650(60A)
– 10A to 1000.0A/div @ CC650(650A)
– 1A to 200.0A/div @CC1100(100A)
– 10A to 2000.0A/div @CC1100(1100A)
– Cursor: Time/frequency difference, voltage difference
– FFT: Rectangular, Hanning, Hamming, Blackman Window
– Math: Addition, subtraction, multiplication, division
– Channel: 8
– Output Level: LVTTL
– Frequency Range: 0-250kHz
– Interface: USB 2.0
– Power : No need extra power supply
– Measurement Size 185 x 150 x 27 (mm)
– Weight 0.35
